Saturday, September 1, 2018

How to Rhinestone

This is the costume I've been working on forever. Today I started the back of the skirt
I refer to rhinestoning as just stoning, and given the need to heat things in spoons on elements and little plastic baggies, frankly the whole set up is a bit Stoner!

This is how I do it. It works really, really well, does not involve toxic glues and doesn't take very long. I took photos as I went, hopefully these will illuminate the process!
You need:
My menu of rhinestones - AB Rosaline and AB Rose, AB Peridot, Peridot and Emerald. These wee baggies are worth nearly as much as I imagine they would be if they contained an illicit substance ;-) These are from www.rhinestonz.co.nz
  • Something to Rhinestone (my robe as shown above)
  • Flatback rhinestones - I use Arabesques because I am a cheapskate - they are fifth of the price of Swarovskis and not quite as good, but on this costume it's all about the quantity. 
  • Beeswax
  • A wooden skewer
  • A teaspoon with a heatproof handle
  • Aleene's Tacky Glue - it is by far the best glue as it holds its shape really well and dries fast. For stretch fabrics or things you will need to wash, use Aleene's Flexible and Stretchable, which isn't quite as thick but holds a blob well.
  • Silicone baking paper - pretty much essential for thin fabrics or areas like sleeves where you have to have one layer of a costume over the other.
  • PATIENCE
 To make an applicator stick, first cut a sliver off a block of beeswax. Pop this into the bowl of the teaspoon and put on an element to soften/melt.
 You only need a little bit of beeswax for this - you can use the rest for sniffing!
 When it is soft enough to mash up with the end of the skewer, gather up some and form a  knob of it on the skewer end. Let it get a bit firmer before using.
 I am starting with the dark green stones. I tip enough to do the job onto a lid, so I can move them around easily while working.
 While my beeswax is cooling, I turned all of the stones up this way.
I spread the gown on the kitchen bench return, over a layer of the silicon paper.
 Now squeeze out wee blobs of the glue where you want the stones to go. With these deep green stones, I am working on the darkest branches of foliage in the pattern.
See how many blobs I can do in advance! You can do more than this too. The glue stays wet for plenty of time, though I wouldn't wander off halfway through to take a long phone call. I use the wax stick to gently catch the top of a rhinestone and transfer it to a blob of glue. Gently press it in.
  This is the whole branch completed. See all that white glue showing? It's a good thing! It dries clear but the ring of glue means the stone is held well in place.
This shows the second round of stoning - once I completed the first branch (top of pic) I then glued up two more.
Here's the finished area after I've gone over it again with the other colours of stones. Because this is the back, I've been pretty light-handed - the fronts have about three times as many stones. But I have found the hard way that backs of costumes get a hard time with sitting etc, so this is just about it not being obviously not done!

Top tips:
  • Your beeswax applicator my get less effective if it is cold.  I use my fingers to soften it back up again. Remember you need only the lightest pressure to lift the stone and transfer. It should release, really easily as a result.
  •  Aleene's dries enough to peel the fabric off the paper in about an hour. Gently peel it off - it will be stuck but it will still lift. It is not dry enough to wear until at least the next day but preferably a good week of curing is best. But with a huge job like this neverending robe, I need to shift the completed stuff so I can do the next section
  • Of course you can follow a pattern - I do this too but it is far easier to follow the pattern of a piece of lace, a print or a brocade design. Same principles apply.
  • If you can't find non-hot fix in your colour, get the hot fix ones and stick them on this way. It's no biggie.
  • ALWAYS stretch out garments that are worn stretched, before you do them. 
  • ALWAYS use a thick, tacky glue like Aleenes - if you are working on a foam cup bra or some other surface that is not flat, it won't dribble down the slope like GemTac or Tiger Grip. Not all PVA based glues are the same!
Good luck and let me know how it goes!





6 comments:

  1. Oh my God, I am feeling your pain. What a gorgeous costume and lovely colours of stones. They will look amazing together.
    I love rhinestones, they really up the ante on a garment, especially under stage lights. Boy, are they a pain to apply in any sort of meaningful way. That is a top tip about the beeswax to pick them up. I either use a slightly damp fingertip or a pair of tweezers so guaranteed they will end up the wrong way round in a heap of glue. I love Gemtac and use it religiously. You have the patience of a saint. :) Xx

    ReplyDelete
    Replies
    1. They sure do, especially with the LED stage lights becoming increasingly common -the effect is huge. I work on the principle that I can wear it any time unfinished, by doing sections that make sense. I've worn this costume several times with incompleted rhinestoning and noone notices hehe. GemTac is fab once dry but it takes SO LONG to do so, I could never get this thing done. I moved it four times today and even with the glue not quitedry, nothing shifted, or stuck to something else. Last two panels to go! Wish me luck :)

      Delete
  2. This is the exact opposite of camouflage I have just realised.

    ReplyDelete
    Replies
    1. SO true! I call it seen from Space so yeah not quite. ind you, while it isn't camouflage it Is the art of deception. I get hit on all the time when in costume and I find it incredible that any bloke would not be able to see past the blocked eyebrows, glitter, lashes, corsets etc and realise that underneath is a very ordinary fat old lady hehe.

      Delete
    2. There was the warship camouflage called 'Dazzle'. Maybe it is more like that. I have a theory (which has been put into practice by others) that if you want to steal something in broad daylight, wear Hi-Viz.

      Delete
    3. Oh definitely! I am all about Dazzle - some of my costumes have that feel about them. Only in solid sequins. I am built on the lines of a battle ship...

      Delete